732-246-0070
PO Box 5610 • 74 Veronica Ave
Somerset, NJ 08875
ISO 9001 Certified

Employment

Join Our Team

Die Cast Set-Up Person


Overview

The Casting Set-Up Person is charged with the set-up of tools in the die casting machines per the parameters established by their supervisors to assure company profit, on time delivery as well as the quality expected by our customers.

Responsibilities

The Die Cast Set-Up Person is responsible for:
  1. Complete all set-ups as per the Work Instructions in a timely manner.
  2. Assist in the training of operators and others.
  3. Check schedule to be sure next die to be set up is ready.
  4. Advise manager of any supplies needed to pertaining to set-ups.
  5. Make first shots on new set-ups or repaired tooling and assure that castings are to quality specifications per Work Instructions.
  6. Assist in the housekeeping of the department.
  7. Assist in the general operations of the department; machine operation, maintenance, etc….
  8. Assist Die Cast Machine Operators with any machine, casting or quality issues.
  9. Return tools after production to Tool Room for routine maintenance along with required samples and paperwork. Also two last castings to Q.A. Department.
  10. Follow Carteret`s policies and procedures.
  11. Performs any other tasks or duties as assigned by his supervisors.

Tasks

Set-up tasks are specific by die. The Set-up Person should follow the Work Instructions and report any variance in machine operation or quality to his supervisors right away.

Experience

Individuals seeking this position should be dependable, able to follow directions and conscientious about their work and their work environment. Must also have mechanical aptitude.

Education

Individuals seeking this position should have a high school diploma, its equivalent or at least be able to read, write and communicate in English.

Send your resume to info@carteretdiecasting.com.



Tool Room Personnel


Overview

Tool room personnel are charged with maintaining all tooling in good working condition.

Responsibilities

Tool room personnel are responsible for all tooling, tooling components, machining supplies and the safe effective operation of the tool room itself.

Tasks

  1. Perform preventive maintenance on all tooling per Carteret Die Casting Die Cleaning Checklist.
  2. Maintain an adequate supply of components for maintenance and repair of tooling.
  3. Repair, replace, modify or improve tooling per instructions on Carteret Die Casting work orders.
  4. Keep tool room and equipment clean.
  5. Maintain tooling history records.
  6. Evaluate new tooling, tooling corrections as made by outside vendors per “New Die/Repaired Die Checklist”.


Experience

Individuals seeking this position should be dependable, able to follow instructions, read blueprints, have knowledge of operating all tool room and measurement equipment and be conscientious about their work and their work environment.

Education

Individuals seeking this position should have a high school diploma, its equivalent and have some machining training or experience and be able to read and write in English.

Send your resume to info@carteretdiecasting.com.



Quality Control Inspector


Overview

The Quality Control Inspector is charged with assuring sure that product manufactured meets all quality requirements.

Responsibilities

The Quality Control Inspector is responsible for the visual and mechanical inspection of product ranging from raw castings thru plated / painted product.

Tasks

  1. First Piece Inspection – visual and mechanical inspection of first piece samples from casting and secondary operations.
  2. In-Process / Roving Inspection – visual inspection at machine centers during casting and secondary operations, visual and mechanical inspection within Quality during casting and secondary operations.
  3. Final Inspection – visual and mechanical inspection of finished product.
  4. Entry of variables data into SPC program for product that require statistical analysis.
  5. Generate, maintain and file required quality records and forms as necessary.
  6. Assist with the general operation of the department
  7. Enforce QA related policies and procedures as sanctioned by the Quality Assurance Manager.
  8. Maintain the QA facility in an orderly fashion, storing all equipment and retained samples in its’ proper location.
  9. Perform other related duties that may be assigned from time to time by the Quality Assurance Manager or Lead Inspector.


Experience

Should have experience in quality systems and maintenance, casting production processes and secondary operations.

Education

Should have a high school diploma, Quality systems training, ISO training or an equivalent amount of experience. Must have knowledge in the use of standard measuring equipment such as micrometers, vernier calipers, optical comparitors, etc. Must also be able to interpret product drawings and read and write in English.

Send your resume to info@carteretdiecasting.com.







Copyright © Carteret Die Casting Corp. All rights reserved.
PO Box 5610 • 74 Veronica Ave • Somerset, NJ 08875 • Tel: 732-246-0070
Site Design: Design-2-Part Web Design.